1. Driving System 2. Silo 3. Feeding Tube 4. Corner System 5. Sensor 6. Automatic Feed Drop System 7. Feed-drop System 8.Metering Feed Dispenser 9.Electrical Control System 10. Dry & Wet Feeder
Drive Power: 1.5kw/2hp
Line Speed: 37m/min
Feed Pipe Occupancy Rate: In condition The Feed Density is 650kg/m3, 66% Pipe is Filled, About 1.2kg/meter. Feed Will Be Stocked.
1.Material of Silo is Heavy Galvanized with at least 275G, Anti Corrision; While Fiber Glass Silo Made of Fiber Glass, Low Weight, Higher Strength, Anti-Corrision, Temperature Preservation, Insulation, Long Life Usage etc
2.Keep the Feeds Fresh and Nutritious 3.No Dew Will Generate In the Silo In Large Temperature Difference, Eliminates Opportunities for Feed To Turn Stable on Moldy.
4Fiber Glass Silo With Visiable Window, Can Gives the Details of Feed Amount, Much More Convenient;
5.Encapsulated Bolts On Outside to Prevent Corrosion;
6.New Designed Legs, Easy to Assemble, Weatherproof and Anti-Shock;
7.The Ladders is Made of Galvanized Steel with Guard Rail, It has Better Strength, Smooth Appearance, Heavy Load,Pepoles can Climb Up Easily;
8.Inside is polished and no Burrs, Make Sure the feeds flow fluently;
9.Wide Range of Capacities From 3 Tons to 20 Tons;
1.The Triangle Discharge is Made of High Galvanized 275g, Anti-Corrision, Long Life Usage;
2. Inner is Polished to Guarantee the Feeds Delivery Smoothly, No Sticking;
3. Reasonable Angle for Feeds Convey;
4.Easy Operation and Maintaince.
MAIN FEEDING PIPE
1.The Feeds Main Transporting PipeLine is PVC, With the Charaters of Anti-Aging, Anti-Wearing, Long Life Usage;
2. Low cost.
1.Made of Plastic for Body, Stainless and Heavy Galvanized for Bottom;
2.Feeder and Drinker are at the Same Place, Much More Convenient for Piglet to Take the Feeds and Water;
3.360o Feeding system, can offer More Pigs than Standard Pan feeder;
4.Humanistic Design, can Prevent the feeds from Waste.
5.Save Cost, Space and Labor Cost;
6.Capacity from 30KG To 150KG.
MEASUREMENT CYLINDER DISPENSER
1.The Pregnant Sow Shoulde be Feed-limited, The Dispenser has Measurement on the Cylinder, can Controll the Feeds Amount For Different Period Sows;
2.The Dispenser is Transparent, Convenient Farmer to Monitor the Feed Status Clearly.
1.Hot Galvanized Steel Body and Stainless Steel Feeder;
2.Rational Designed Tail Part, Length Adjustment According To The Sow Size;
3.Rounded Pipe End, No Sharp Edge Protect Pigs From Harm;
4.Movable Limiting Beam, Avoid Standing Sow Lie Down Suddenly to Injure Their Baby.
5.High Strength PVC Pad Incubator, Good Heat Preservation, Anti-Aging;
6.With Plastic Slat for Piglets, Smooth Appearance Without Any Burrs To Protect Them Well, 7.While With Cast Iron Slat for Sow, Can Load Huge Sows without Damage;
8.Easy to Assemble and Clean;
1.Made of Carbon Steel, Anti-Rust,
2.The only manufactuer in China to Produce NO WELDING POINT Auger;
3.Low Friction to Prevent Feeds Sticking;
4.Capacity from 500-4800kg/hour.
1.Smooth Surface to Make Sure the Feeds Flow Freely;
2. Can delivery the Feeds Curve, While the Auger Cannot;
3.The Plastic Plate can be Loose Because of the Special Process, Prevent the Feeds Sticking Together.
Delivery By Chain-disc, Anti-wearing;
1.Made of Imported Paper and Glue With High Tech, Heavy load;
2.Water Resisting; Good Absorbing Ability;
3.Large Evaporative Cooling Area, High Efficiency up to 80%;
4.With Active Carbon Can Speed Up Absorbing Water
1.Elegant Appearance With Big Air Inlet;
2.Stainless Steel Blade, Corrosion Resistant, Long Life;
3.Belt Has Good Tension, Make the winds constant and stable;
4.Opening Unit is From Advanced Nylon, High Strength and Long Life
Sidewall Air Inlet
1.Galvanized Steel Air Inlets with Both Sides Wind Board, Preventing Wind Flowing to Ground to Protect With Little Birds. The Flexible Board Can Prevent Heat Loss; 2.Injection Molding Air Inlets Made of Raw Quality Plastic with Elegant Appearance, Good Sealing, Can be Adjusted to Needed Angel by Hand or Automatic;